Outdated Internet Browser Detected

It appears that the Internet Browser you are using to connect to SummitRacing.com is outdated and insecure. To continue to use SummitRacing.com, you must upgrade your browser to a newer, secure version. Use these links to help you upgrade your browser.

In-Store Pickup Location Close

MSD 8.5mm Super Conductor Spark Plug Wire Sets 35599

Spark Plug Wires, Super Conductor, Spiral Core, 8.5mm, Red, 90 Degree Boots, Chevy, Small Block, V8, Set

Estimated Ship Date: Monday 12/1/2014 Would you rather pick it up? Select Location

Brand: MSD Ignition
Manufacturer's Part Number: 35599
Summit Racing Part Number: MSD-35599

UPC: 085132355990
Assembled: Yes
Diameter (mm): 8.50mm
RFI Suppression: Yes
Wire Color: Red
Distributor Terminal Ends: Male/HEI
Distributor Boot Color: Gray
Distributor Boot Material: Silicone
Spark Plug Boot Ends: Eight 90 degree
Spark Plug Boot Color: Gray
Spark Plug Boot Material: Silicone
Coil Wire Included: Yes
Conductor Style: Spiral core
Quantity: Sold as a set.
Notes: Wires route below headers/exhaust manifolds.
In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

MSD's 8.5mm Super Conductor wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot--but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. MSD's 8.5mm Super Conductor wire sets come available in custom or universal-fit applications.

Warranty

Most Helpful Reviews Review this Product

22 Customer Reviews for MSD Ignition 35599 - MSD 8.5mm Super Conductor Spark Plug Wire Sets

Average Customer Review

5 Star

(16)

4 Star

(4)

3 Star

(0)

2 Star

(2)

1 Star

(0)
+See All 22 Reviews

a little short

I installed these wires on a 1986 camaro a couple of inches more on most of the wires would have been better

1 of 1 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: DAVID from Canada

Date: October 01, 2014

Appearance
Ease of Installation
Price/Value
Quality

The Best Street/Strip Wires, Period

Summit RacingSummit Racing Verified Purchase

I've owned, recommended, and installed lots of these wire sets. Whether it's your hot rod or daily driver, these things are excellent. I have them on almost all of my vehicles! Just as advertised, they're about 50 ohms a foot...Which is superb compared to any stock wire, while maintaining EMI suppression unlike solid-core wires. The silicone jacket and plug boots are thick and tough as expected too. I've had a set on one of my trucks for 11 years and put 150,000 miles on them. Though not recommended to run spark plug wires that long, the past three tune-ups or so checked well with a ohmmeter and only one wire needed to be repaired (from me pulling an end off on removal). A little steep in cost compared to parts-store specials, but you get what you pay for. I'll continue to buy these as long as they sell them. ...read more

1 of 1 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: MATTHEW from IN

Date: March 24, 2014

Appearance
Ease of Installation
Price/Value
Quality

works great

Summit RacingSummit Racing Verified Purchase

I put these on a 5.7 liter tbi with a jegs coil and summit racing distributor worked very well I really like the plastic tabs so you can mark what number the wire is not a bad set of wires the only down fault is price is a little high but all msd stuff is you get what you pay for

1 of 1 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: HEATHER from MI

Date: March 24, 2014

Appearance
Ease of Installation
Price/Value
Quality

wires are too short

Summit RacingSummit Racing Verified Purchase

installing these on a 350 w/ rams horn manifolds. the wires for #s 1,3,2,&4 plugs are probably 6" shorter than factory wires. protecting them from exhaust is a real trick!

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: TOM from NM

Date: November 20, 2014

Appearance
Ease of Installation
Price/Value
Quality

Plug wires

Summit RacingSummit Racing Verified Purchase

Great product just what I wanted

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: HAROLD from OK

Date: November 13, 2014

Appearance
Ease of Installation
Price/Value
Quality

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close