Outdated Internet Browser Detected

The Internet Browser you are using cannot establish a secure connection to SummitRacing.com which will prevent you from being able to Log In or Checkout. This is most likely because SSL 3.0 is your default SSL setting. This makes you vulnerable to the "POODLE exploit" and to ensure your security, it is not allowed on our site. Please change your browser security settings to not allow SSL 3.0 or attempt to update your browser using these links.

In-Store Pickup Location Close

Keyser Manufacturing Sure Seals 100-68827-20

Keyser Manufacturing 100-68827-20 - Keyser Manufacturing Sure Seals

Image is a representation of this item.
Actual item may vary.

Loading media


In progress

Air Cleaner Spacer, O-Ring Seals, Aluminum, Natural, 5.125 in. Inlet, 2.000 in. Height, Each

Estimated Ship Date: Tomorrow Would you rather pick it up? Select Location

Brand: Keyser Manufacturing

Manufacturer's Part Number: 100-68827-20

Part Type: Air Filter Assembly Spacers

Product Line: Keyser Manufacturing Sure Seals

Summit Racing Part Number: KYS-100-68827-20

Fits Carburetor Neck Diameter: 5 1/8 in.

Air Cleaner Spacer Height (in): 2.000 in.

Air Cleaner Spacer Material: Billet aluminum

Air Cleaner Spacer Finish: Natural

Quantity: Sold individually.

Notes: These spacers come with O-rings for a positive seal.

In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

Keyser Manufacturing Sure Seals are designed to make a positive seal on your carburetor. Their 5 1/8 in. diameter fits all Holley-type carbs. Keyser Manufacturing Sure Seals are offered in a choice of sizes to suit your application and needs.

Most Helpful Reviews Review this Product

8 Customer Reviews for Keyser Manufacturing 100-68827-20 - Keyser Manufacturing Sure Seals

Average Customer Review

5 Star

(5)

4 Star

(2)

3 Star

(1)

2 Star

(0)

1 Star

(0)
+See All 8 Reviews

Well-made, BUT.....

Summit RacingSummit Racing Verified Purchase

The aluminum Keyser spacer fit perfectly on my Ford 289 2-bbl carb, but only after I ground down about 1/8-inch of aluminum from the interior surface. The spacer is very well-made, but it is just a bit too thick to allow the small actuating arm to operate the butterfly. The spacer pinches the arm so that the butterfly is stuck in the choked position. I used a power drill to remove some of the aluminum so that there was space enough for the actuator arm to go up and down. Not difficult, but it was messy, due to the considerable amount of aluminum filings that piled up, and it involves finding cutting discs that work inside the spacer (I used a power drill). I don't know if all carburetors use an actuating arm that protrudes just enough to interfere with the Keyser spacer, but if so, Keyser needs to create a 2-inch notch in the spacer. Other than that, the spacer is of top-notch construction. ...read more

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: BARRY from CA

Date: November 21, 2014

Appearance
Ease of Installation
Price/Value
Quality

Nice part

Heavy weight and great fit. Recommended.

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: ERIC from SC

Date: October 15, 2014

Appearance
Ease of Installation
Price/Value
Quality

Billet Spacer

Summit RacingSummit Racing Verified Purchase

Very good quality Quick shipping Overall this is a top preformance part

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: NOEL from Australia

Date: October 03, 2014

Appearance
Ease of Installation
Price/Value
Quality

Keyser Manufacturing Sure Seals 100-68827-20

Summit RacingSummit Racing Verified Purchase

This spacer worked and fit a whole lot better than the cheap plastic one I had first. This spacer is well made and seals great. It does exactly as it claimed to do and also fit great on a summitracing 600cfm carburetor. I recommend this air cleaner spacer if you a looking to make more room for your carburetor but do not want to get a carburetor spacer. ...read more

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: DYLAN from IA

Date: August 13, 2014

Appearance
Ease of Installation
Price/Value
Quality

looks great

Summit RacingSummit Racing Verified Purchase

Fits great, looks greats, way better then the plastic one I had

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: DAVID from CO

Date: June 23, 2014

Appearance
Ease of Installation
Price/Value
Quality

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close