Outdated Internet Browser Detected

It appears that the Internet Browser you are using to connect to SummitRacing.com is outdated and insecure. To continue to use SummitRacing.com, you must upgrade your browser to a newer, secure version. Use these links to help you upgrade your browser.

In-Store Pickup Location Close

Competition Engineering Adjustable Drag Shocks C2610

Competition Engineering C2610 - Competition Engineering Adjustable Drag Shocks

Image is a representation of this item.
Actual item may vary.

Loading media


In progress

Shock/Strut, Monotube, Adjustable, Front, Buick, Chevy/Ford, Mercury, Oldsmobile, Pontiac, RWD, Each

Estimated Ship Date: Today Would you rather pick it up? Select Location

Manufacturer's Part Number: C2610
Part Type: Shocks and Struts
Summit Racing Part Number: CEE-2610

Internal Design: Monotube
Adjustable: Yes
Gas Charged: No
Extended Length (in): 15.340 in.
Collapsed Length (in): 9.620 in.
Bushing Material: Rubber
Bushing Color: Black
Boot Included: No
Body Diameter (in): 1.630 in.
Upper Mount: Stud
Lower Mount: Bar pin
Quantity: Sold individually.
In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.

Warranty

Most Helpful Reviews Review this Product

1 Customer Reviews for Competition Engineering C2610 - Competition Engineering Adjustable Drag Shocks

Average Customer Review

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(1)
+See All 1 Reviews

Terrible quality control

Summit RacingSummit Racing Verified Purchase

I purchased Comp Engineering's front and back drag shocks. The quality control was terrible, actually completely lacking. On the two front shocks, one worked fine, but the other had nearly no damping at all, in any of the three settings. On the easiest setting I could compress or extend the shock by hand in one second. On the hard setting it took maybe 3 seconds, but still a fraction the good shock. On the rear shock the difference was not quite as much but the shocks were not close to balanced. I returned them and bought the cheaper Summit brand shocks which seemed balanced and are working just fine. ...read more

1 of 1 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: TJ from MI

Date: March 10, 2014

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close