Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

Total Seal Piston Rings S9945-30 - Total Seal TSS Street Piston Rings

Total Seal Piston Rings S9945-30 - Total Seal TSS Street Piston Rings large image

Image is a representation of this part. Actual part may vary.

  • Piston Rings, Cast Iron, 3.766 in. Bore, 5/64 in., 5/64 in., 3/16 in. Thickness, 8-Cylinder, Set
  • Application Specific
 
BrandTotal Seal Piston Rings
Manufacturer's Part NumberS9945-30
Part TypePiston Rings
Product LineTotal Seal TSS Street Piston Rings
Summit Racing Part NumberTSR-S9945-30
 
Bore (in)3.766 in.
Bore (mm)95.656mm
Top Ring IncludedYes
Top Ring Thickness5/64 in.
Second Ring IncludedYes
Second Ring Thickness5/64 in.
Oil Ring IncludedYes
Oil Ring Thickness3/16 in.
Oil Ring TensionStandard
File FitNo
GaplessYes
Top Ring MaterialCast iron
Top Ring Facing MaterialCast iron
Second Ring MaterialCast iron
Second Ring Facing MaterialCast iron
Oil Ring MaterialStainless steel
QuantitySold as a set.
 

Total Seal Steet/Stock piston rings give you more power, less blowby.

You won't lose horsepower due to blowby when you install Total Seal TSS Steet piston rings. The secret is in Total Seal's gapless second ring technology. This arrangement uses an oversize cast-iron main ring, plus a chrome-faced secondary ring that overlaps the main ring's end gap. This interlocking design forms a gapless seal, which gives Total Seal TSS Steet rings a miniscule leakdown rate of just 2 percent or less, compared to the 8 to 10 percent rate for conventional gapped rings. Perfect for street or mild race applications with 10.5:1 or lower compression ratios.

Warranty

Total Seal piston rings are unconditionally guaranteed to be free from defects in materials and workmanship. Due to the lack of control over installation procedures and conditions, no warranty is offered concerning performance. This warranty is limited to the replacement of defective or inappropriate rings before installation, provided that the rings have not been filed or damaged. No damages for problems incurred after installation will be considered.