Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

SCAT Engine Components 1-94205 - Scat Engine Rotating Assemblies

SCAT Engine Components 1-94205 - Scat Engine Rotating Assemblies large image

Image is a representation of this part. Actual part may vary.

  • Engine Rotating Assembly, Series 9000, Cast Crank, Forged Pistons, I-Beam Rods, Ford, Small Block, Kit
  • Application Specific
  • Warnings
    • The part SCA-1-94205 has an additional shipping charge of $8.00 per item due to its large size and/or weight.
  • Estimated Ship Date: Today
 
BrandSCAT Engine Components
Manufacturer's Part Number1-94205
Part TypeEngine Rotating Kits
Product LineScat Engine Rotating Assemblies
Summit Racing Part NumberSCA-1-94205
 
Actual Engine CID393
Bore (in)4.030 in.
Bore (mm)102.362mm
Engine Stroke (in)3.850 in.
Pistons IncludedYes
Piston Rings IncludedYes
Piston and Ring Oversize (in)0.030 in.
Piston MaterialForged aluminum
Piston StyleFlat top, with two valve reliefs
Piston Head Volume (cc)+4.00cc
Wrist Pin StyleFloating
Piston Ring Facing MaterialPlasmamoly
Crankshaft IncludedYes
Crankshaft MaterialCast iron
Rear Main Seal Style1-piece, 2-piece
BalancedNo
Engine BalanceExternal
Balance Style28 oz. imbalance
Connecting Rods IncludedYes
Connecting Rod MaterialForged 4340 steel
Connecting Rod Beam StyleI-beam
Rod Bearings IncludedYes
Rod Bearing Undersize (in)Stock
Rod Bearing Undersize (mm)Stock
Main Bearings IncludedYes
Main Bearing Undersize (in)Stock
Main Bearing Undersize (mm)Stock
Cam Bearings IncludedNo
Gaskets IncludedNo
Oil Pump IncludedNo
Camshaft IncludedNo
Lifters IncludedNo
Timing Chain and Gears IncludedNo
Plastigage IncludedNo
Assembly Lubricant IncludedNo
QuantitySold as a kit.
NotesKit features standard style forged pistons. I-Beam rods include 3/8 inch ARP 8740 cap screw bolts.
 

Scat engine rotating assemblies help you put together a winning combination.

These Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft and I-beam or H-beam connecting rods, with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from Federal Mogul or Clevite 77, depending upon the application, and pistons and piston rings made by such well-known manufacturers as JE, Ross, KB, and Mahle. Kits with cast pistons have standard rings; kits with forged pistons have file-fit rings.

Warranty

Scat Engine Components warrants its products against defects in material and workmanship when properly installed. Any alterations or improper installation or use of their products, in conjunction with non-Scat products, will void this warranty.