Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

Lunati 61003LK - Lunati Voodoo Cam and Lifter Kits

Lunati 61003LK - Lunati Voodoo Cam and Lifter Kits large image

Image is a representation of this part. Actual part may vary.

  • Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 268/276, Lift .522/.538, Ford, Small Block, Kit
  • Application Specific
  • Estimated Ship Date: Today
 
BrandLunati
Manufacturer's Part Number61003LK
Part TypeCamshaft and Lifter Kits
Product LineLunati Voodoo Cam and Lifter Kits
Summit Racing Part NumberLUN-61003LK
UPC090127605561
 
Cam StyleHydraulic flat tappet
Basic Operating RPM Range1,800-6,200
Intake Duration at 050 inch Lift227
Exhaust Duration at 050 inch Lift233
Duration at 050 inch Lift227 int./233 exh.
Advertised Intake Duration268
Advertised Exhaust Duration276
Advertised Duration268 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.522 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.538 in.
Valve Lift with Factory Rocker Arm Ratio0.522 int./0.538 exh.
Lobe Separation (degrees)110
Computer-Controlled CompatibleNo
Lifters IncludedYes
Valve Springs IncludedNo
Retainers IncludedNo
Locks IncludedNo
Valve Stem Seals IncludedNo
Timing Chain and Gears IncludedNo
Assembly Lubricant IncludedNo
Pushrods IncludedNo
Rocker Arms IncludedNo
Gaskets IncludedNo
Valve Springs RequiredYes
QuantitySold as a kit.
NotesThis camshaft uses the 5.0L HO and 5.8L Windsor fitring order.
 

Unless you're a witch doctor, choosing the correct cam can be nightmare. These Voodoo cam and lifter kits by Lunati are the answer! The gurus at Lunati have taken cam design to another dimension with profiles never before utilized in cams. Only the world's best profiles are included in this line, making cam selection an easy choice. Voodoo incorporates 30 years of cam design experience with more recent developments in profiles, geometry, and tolerances to deliver the most aggressive ramp profiles ever used in hydraulic flat tappet cams. Asymmetrical lobe designs with slower closing sides set the valve down easy to reduce noise and premature failure of the valvetrain. These cams deliver more "area under the curve," meaning more throttle response, quicker acceleration, more vacuum, and better efficiency, combined with maximum horsepower and torque. Matching lifters are included.

Warranty

Loading...