Warnings

close

Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

close

Hedman Hedders 69094 - Hedman Street Tork-Step Painted Hedders

  • Headers, Street Tork-Step, Full-Length, Painted, Chevy, GMC, Blazer, Suburban, Pickup, Jimmy, Small Block
  • Application Specific
  • Estimated Ship Date: Today
  • Share Share
 
BrandHedman Hedders
Manufacturer's Part Number69094
Part TypeHeaders
Product LineHedman Street Tork-Step Painted Hedders
Summit Racing Part NumberHED-69094
 
Header StyleFull-length
Header MaterialSteel
Header FinishPainted
Primary Tube Diameter (in)1 1/2 - 1 5/8 in.
Collector AttachmentBall and socket flange
Collector Diameter3.000 in.
TunedNo
Primary Tube Gauge18-gauge
Flange StyleStandard
Flange Thickness (in)1/4 in.
Bolts/Studs IncludedYes
Gaskets IncludedYes
Reducers IncludedYes
Y-Pipe IncludedNo
Motor Mounts IncludedNo
Transmission Mount IncludedNo
QuantitySold as a pair.
 

The torque-boosting headers.

Bolt on a set of Hedman Street Tork-Step painted headers and get ready for solid increases in engine torque readings. The secret is in the precise broadening of the primary tubes to create a boost in torque. They provide more low-end pulling power, greater rpm recovery after shifting, and more available power during downshifts for passing. Street Tork-Steps are made of 18-gauge steel with 1/4 in. flanges. On top of that, not only are they great at building torque, they're also extremely reliable. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

Warranty

close

Hedman Hedders warrants their Street Headers against defects in materials and workmanship for the lifetime of the product. This includes tube cracks, bad welds, warped flanges, etc. In addition, the HTC ceramic coating utilized on Hedman's ceramic-coated headers is warranted for 5 years from the date of purchase against chipping, peeling, fading, discoloring, and rusting. Headers subjected to improper installation, off-road use, road hazards, and the use of Thermal Wrap are void of any warranty whatsoever. The ceramic-coated headers' finish warranty is void if the headers are used on engines equipped with superchargers, turbochargers, or nitrous systems. Breaking in a new or rebuilt engine with HTC coated Hedders will void coating warranties. Hedman recommends the use of cast iron exhaust manifolds or old Hedders during the initial break-in period of approximately 20 minutes. This will avoid damage to the coating's high-luster finish. You must have at least one hour of normal engine use before you can run your engine or vehicle on a dyno. The use of NOS, superchargers, or turbochargers will void the HTC warranty.
Back to Results

close