Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

Hedman Hedders 12056 - Hedman 180 Degree Bends

Hedman Hedders 12056 - Hedman 180 Degree Bends large image

Image is a representation of this part. Actual part may vary.

  • Exhaust Tubing, 180 Degree, Mandrel Bend, 1 7/8 in. Diameter, 3 in. Radius, 18-Gauge, Steel, Each
  • Estimated Ship Date: 4/13/2010
 
BrandHedman Hedders
Manufacturer's Part Number12056
Part TypeExhaust Pipes, Individual Bends
Product LineHedman 180 Degree Bends
Summit Racing Part NumberHED-12056
 
Outside Diameter (in)1.875 in.
Bend StyleJ-bend
Bend Angle (degrees)180 degrees
Tubing MaterialSteel
Mandrel-BentYes
Tubing Gauge18-gauge
Bend Radius (in)3.000 in.
Leg 1 Length (in)3.500 in.
Leg 2 Length (in)12.000 in.
Tubing FinishNatural
QuantitySold individually.
 

Customize your exhaust system.

These 180 degree bends from Hedman feature the same quality as their famous headers. Made of mandrel-bent mild steel, these bends are perfect for making your own headers with Hedman Hustler flanges, or for customizing other parts of your exhaust system. They come available in several different diameters, radii, and leg lengths.

Warranty

Hedman Hedders warrants their Street Headers against defects in materials and workmanship for the lifetime of the product. This includes tube cracks, bad welds, warped flanges, etc. In addition, the HTC ceramic coating utilized on Hedman's ceramic-coated headers is warranted for 5 years from the date of purchase against chipping, peeling, fading, discoloring, and rusting. Headers subjected to improper installation, off-road use, road hazards, and the use of Thermal Wrap are void of any warranty whatsoever. The ceramic-coated headers' finish warranty is void if the headers are used on engines equipped with superchargers, turbochargers, or nitrous systems. Breaking in a new or rebuilt engine with HTC coated Hedders will void coating warranties. Hedman recommends the use of cast iron exhaust manifolds or old Hedders during the initial break-in period of approximately 20 minutes. This will avoid damage to the coating's high-luster finish. You must have at least one hour of normal engine use before you can run your engine or vehicle on a dyno. The use of NOS, superchargers, or turbochargers will void the HTC warranty.