Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

Fram HP1 - Fram HP Series Oil Filters

  • Oil Filter, HP Series, 3/4-16 in. Thread, 5.75 in. High, Each
  • Application Specific
  • Estimated Ship Date: Today
 
BrandFram
Manufacturer's Part NumberHP1
Part TypeOil Filters
Product LineFram HP Series Oil Filters
Summit Racing Part NumberFRM-HP1
 
Oil Filter StyleCanister
Height (in)5.750 in.
Outside Diameter (in)3.719 in.
Filter Bypass Relief ValveYes
Relief Valve Open (psi)22 psi
Anti-Drainback ValveYes
Smallest Particle Filtered18 microns
Maximum Burst Pressure (psi)500 psi
Thread Size3/4-16 in.
Gasket Outside Diameter (in)2.813 in.
Gasket Inside Diameter (in)2.422 in.
Gasket Thickness (in)0.328 in.
QuantitySold individually.
NotesIf space permits, may be used as High Performance replacement.
 

Trap particles to prevent engine wear.

Fram's HP Series filters are just for performance and racing use. The spin-on filters can trap very small micron-sized particles that cause most engine wear. All filters have an anti-drainback valve, with a maximum flow rate.

Warranty

Fram filters are warranted against defects in design, materials, and workmanship. New vehicle warranties remain in effect when Fram filters are installed according to directions on Fram filter packaging, and replaced at least as often as vehicle manufacturer's recommended change intervals.