| |
| Brand | | Fluidampr |
| Manufacturer's Part Number | | 720311 |
| Part Type | | Harmonic Balancers |
| Product Line | | Fluidampr Harmonic Dampers |
| Summit Racing Part Number | | FLU-720311 |
| | |
| Engine Balance | | Internal |
| Safety Rating | | SFI 18.1 |
| Degree Markings | | Yes |
| Degree Marking Range | | 50 BTDC to 10 ATDC |
| Outside Diameter (in) | | 7.250 in. |
| Harmonic Balancer Material | | Steel |
| Harmonic Balancer Construction | | Fluid |
| Harmonic Balancer Finish | | Black zinc chromate |
| Mounting Hardware Included | | No |
| Quantity | | Sold individually. |
| Notes | | Additional timing/degree marks at 90, 180, and 270 degrees. |
| |
Using only three parts--a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two--these SFI-approved Fluidamprs can control all crankshaft vibration, not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
Warranty
Results 1-20 of 217
| |
| Make | | CHRYSLER |
| Model | | 300 |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1962 |
| Ending Year | | 1966 |
| Engine Family | | Mopar big block B |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | 300 |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1966 |
| Ending Year | | 1971 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | IMPERIAL |
| Submodel | | CROWN |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1968 |
| Ending Year | | 1970 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | IMPERIAL |
| Submodel | | LEBARON |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1968 |
| Ending Year | | 1975 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | IMPERIAL |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1966 |
| Ending Year | | 1967 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEWPORT |
| Submodel | | CUSTOM |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1968 |
| Ending Year | | 1971 |
| Engine Family | | Mopar big block B |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEWPORT |
| Submodel | | CUSTOM |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1968 |
| Ending Year | | 1976 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEWPORT |
| Submodel | | ROYAL |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1972 |
| Ending Year | | 1972 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEWPORT |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1965 |
| Ending Year | | 1971 |
| Engine Family | | Mopar big block B |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEWPORT |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1966 |
| Ending Year | | 1978 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEW YORKER |
| Submodel | | BROUGHAM |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1972 |
| Ending Year | | 1975 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEW YORKER |
| Submodel | | BROUGHAM |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1976 |
| Ending Year | | 1976 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEW YORKER |
| Submodel | | BROUGHAM |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1977 |
| Ending Year | | 1978 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | NEW YORKER |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1966 |
| Ending Year | | 1974 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | SARATOGA |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1959 |
| Ending Year | | 1960 |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | TOWN & COUNTRY |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1959 |
| Ending Year | | 1971 |
| Engine Family | | Mopar big block B |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | TOWN & COUNTRY |
| Engine Type | | V8 |
| Liter | | 7.2 |
| CID | | 440 |
| Engine Size | | 7.2L/440 |
| Beginning Year | | 1968 |
| Ending Year | | 1977 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | CHRYSLER |
| Model | | WINDSOR |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1959 |
| Ending Year | | 1961 |
| Engine Family | | Mopar big block B |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | DODGE |
| Model | | 330 |
| Engine Type | | V8 |
| Liter | | 6.3 |
| CID | | 383 |
| Engine Size | | 6.3L/383 |
| Beginning Year | | 1964 |
| Ending Year | | 1964 |
| Engine Family | | Mopar big block B |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. Will not fit 1970-71 six-pack engines. |
| |
| |
| Make | | DODGE |
| Model | | 330 |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 426 |
| Engine Size | | 7.0L/426 |
| Beginning Year | | 1964 |
| Ending Year | | 1964 |
| Engine Family | | Mopar big block RB |
| Crankshaft Pulley Bolt Hole Quantity | | Six |
| Application Notes | | Modifications of pulley spacing and an "A" engine crank bolt are required on some applications. |
| |
Suggested Parts: Parts that may improve the performance or installation of part number FLU-720311.
Results 1-2 of 2
Harmonic Balancer Installation Tool, 7/16, 1/2, 5/8, 3/4 in. Adapters, Ford/GM/Mopar, Kit
Part Number:
MOR-61744
Estimated Ship Date: 5/29/2012
Harmonic Balancer Installation Tool, 7/16, 1/2, 5/8, 3/4 in. Adapters, Ford/GM/Mopar, Kit
Part Number:
SUM-G1023
Estimated Ship Date: 5/29/2012