| |
| Brand | | Fluidampr |
| Manufacturer's Part Number | | 720201 |
| Part Type | | Harmonic Balancers |
| Product Line | | Fluidampr Harmonic Dampers |
| Summit Racing Part Number | | FLU-720201 |
| | |
| Engine Balance | | Internal |
| Safety Rating | | SFI 18.1 |
| Degree Markings | | Yes |
| Degree Marking Range | | 50 BTDC to 10 ATDC |
| Outside Diameter (in) | | 7.250 in. |
| Harmonic Balancer Material | | Steel |
| Harmonic Balancer Construction | | Fluid |
| Harmonic Balancer Finish | | Black zinc chromate |
| Mounting Hardware Included | | No |
| Quantity | | Sold individually. |
| Notes | | Additional timing/degree marks at 90, 180, and 270 degrees. |
| |
Using only three parts--a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two--these SFI-approved Fluidamprs can control all crankshaft vibration, not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
Warranty
Results 1-20 of 289
| |
| Make | | FORD |
| Model | | CLUB |
| Engine Type | | V8 |
| Liter | | 5.8 |
| CID | | 352 |
| Engine Size | | 5.8L/352 |
| Beginning Year | | 1958 |
| Ending Year | | 1964 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | CLUB |
| Engine Type | | V8 |
| Liter | | 6.4 |
| CID | | 390 |
| Engine Size | | 6.4L/390 |
| Beginning Year | | 1962 |
| Ending Year | | 1964 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 5.4 |
| CID | | 332 |
| Engine Size | | 5.4L/332 |
| Beginning Year | | 1958 |
| Ending Year | | 1959 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 5.8 |
| CID | | 352 |
| Engine Size | | 5.8L/352 |
| Beginning Year | | 1958 |
| Ending Year | | 1967 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 6.4 |
| CID | | 390 |
| Engine Size | | 6.4L/390 |
| Beginning Year | | 1962 |
| Ending Year | | 1971 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 427 |
| Engine Size | | 7.0L/427 |
| Beginning Year | | 1964 |
| Ending Year | | 1966 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 428 |
| Engine Size | | 7.0L/428 |
| Beginning Year | | 1968 |
| Ending Year | | 1970 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 429 |
| Engine Size | | 7.0L/429 |
| Beginning Year | | 1969 |
| Ending Year | | 1973 |
| Engine Family | | Ford big block 385 Series |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Crank key modifications may be required on some 429 Boss engines. May need stepped key. Key slot width and length may be different. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SEDAN |
| Engine Type | | V8 |
| Liter | | 7.5 |
| CID | | 460 |
| Engine Size | | 7.5L/460 |
| Beginning Year | | 1972 |
| Ending Year | | 1974 |
| Engine Family | | Ford big block 385 Series |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 5.4 |
| CID | | 332 |
| Engine Size | | 5.4L/332 |
| Beginning Year | | 1958 |
| Ending Year | | 1959 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 5.8 |
| CID | | 352 |
| Engine Size | | 5.8L/352 |
| Beginning Year | | 1958 |
| Ending Year | | 1967 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 6.4 |
| CID | | 390 |
| Engine Size | | 6.4L/390 |
| Beginning Year | | 1962 |
| Ending Year | | 1964 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 6.4 |
| CID | | 390 |
| Engine Size | | 6.4L/390 |
| Beginning Year | | 1968 |
| Ending Year | | 1971 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 427 |
| Engine Size | | 7.0L/427 |
| Beginning Year | | 1964 |
| Ending Year | | 1964 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 427 |
| Engine Size | | 7.0L/427 |
| Beginning Year | | 1966 |
| Ending Year | | 1966 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 427 |
| Engine Size | | 7.0L/427 |
| Beginning Year | | 1968 |
| Ending Year | | 1968 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 428 |
| Engine Size | | 7.0L/428 |
| Beginning Year | | 1968 |
| Ending Year | | 1969 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 7.0 |
| CID | | 429 |
| Engine Size | | 7.0L/429 |
| Beginning Year | | 1969 |
| Ending Year | | 1973 |
| Engine Family | | Ford big block 385 Series |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Crank key modifications may be required on some 429 Boss engines. May need stepped key. Key slot width and length may be different. |
| |
| |
| Make | | FORD |
| Model | | COUNTRY SQUIRE |
| Engine Type | | V8 |
| Liter | | 7.5 |
| CID | | 460 |
| Engine Size | | 7.5L/460 |
| Beginning Year | | 1972 |
| Ending Year | | 1974 |
| Engine Family | | Ford big block 385 Series |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| |
| |
| Make | | FORD |
| Model | | COURIER SEDAN DELIVERY |
| Engine Type | | V8 |
| Liter | | 5.8 |
| CID | | 352 |
| Engine Size | | 5.8L/352 |
| Beginning Year | | 1957 |
| Ending Year | | 1958 |
| Engine Family | | Ford big block FE |
| Crankshaft Pulley Bolt Hole Quantity | | Four |
| Application Notes | | Must shorten sleeve between damper and timing gear 0.500 in. and add 0.375 in. new spacer between damper and pulley. Stepped key may be required. |
| |
Suggested Parts: Parts that may improve the performance or installation of part number FLU-720201.
Results 1-3 of 3
Damper Puller, Installer, Puller Plate, Installer Studs, Puller Bolts, and Storage Case, Kit
Part Number:
ATI-918999
Estimated Ship Date: 5/29/2012
Harmonic Balancer Installation, Removal Tool, Universal, Kit
Part Number:
MOR-61743
Estimated Ship Date: 6/13/2012
Harmonic Balancer Installation, Puller Tool, 7/16, 1/2, 5/8, 3/4 in. Shafts, Storage Case, Universal, Kit
Part Number:
SUM-G1025
Estimated Ship Date: 5/29/2012