Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

Edelbrock 3790 - Edelbrock Performer-Plus Cam and Lifter Kits

  • Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 253/263, Lift .420/.442, Chevy, 2.8L V6, Kit
  • Application Specific
  • Estimated Ship Date: Today
 
BrandEdelbrock
Manufacturer's Part Number3790
Part TypeCamshaft and Lifter Kits
Product LineEdelbrock Performer-Plus Cam and Lifter Kits
Summit Racing Part NumberEDL-3790
 
Cam StyleHydraulic flat tappet
Basic Operating RPM RangeIdle-5,500
Intake Duration at 050 inch Lift204
Exhaust Duration at 050 inch Lift214
Duration at 050 inch Lift204 int./214 exh.
Advertised Intake Duration253
Advertised Exhaust Duration263
Advertised Duration253 int./263 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.420 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.442 in.
Valve Lift with Factory Rocker Arm Ratio0.420 int./0.442 exh. lift
Lobe Separation (degrees)112
Intake Valve Lash0.000 in.
Exhaust Valve Lash0.000 in.
Computer-Controlled CompatibleNo
Lifters IncludedYes
Lifter StyleHydraulic flat tappet
Valve Springs IncludedNo
Retainers IncludedNo
Locks IncludedNo
Valve Stem Seals IncludedNo
Timing Chain and Gears IncludedNo
Assembly Lubricant IncludedYes
Pushrods IncludedNo
Rocker Arms IncludedNo
Gaskets IncludedNo
QuantitySold as a kit.
 

Optimize your torque in the low- to mid-range and improve throttle response.

Edelbrock's Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.

Warranty

Edelbrock Corporation products are covered by a general warranty that states that their products will be free from defects in materials and workmanship. The length of this warranty is as follows: Performer series carburetors and Race Division products (90 days), remanufactured carburetors (30 days), Tubular Exhaust Systems and Thunder Series AVS Carburetors (one year), stainless steel exhaust systems (five years), RPM series mufflers/cat-back exhaust systems and IAS strut and shock absorbers (limited lifetime warranty; finish and shock boots are not covered), and crate engines (2 years or 24,000 miles, whichever comes first). All warranties are based on the assumption that the product(s) were properly installed, subjected to normal use and service, and that they have not been modified, neglected, or used on racing or competition applications. The warranty covers only the product itself, and not the cost of installation and removal. Edelbrock's warranty card must be completed and received by Edelbrock no later than 30 days from the purchase date to validate the warranty. Cylinder heads must be returned to Edelbrock for inspection before any refund or exchange will be done.