Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

Edelbrock 2201 - Edelbrock Performer RPM Hydraulic Roller Camshafts

  • Camshaft, Hydraulic Roller Tappet, Advertised Duration 296/300, Lift .539/.548, Chevy, Small Block, Each
  • Application Specific
  • Estimated Ship Date: Today
 
BrandEdelbrock
Manufacturer's Part Number2201
Part TypeCamshafts
Product LineEdelbrock Performer RPM Hydraulic Roller Camshafts
Summit Racing Part NumberEDL-2201
 
Cam StyleHydraulic roller tappet
Basic Operating RPM Range1,500-6,500
Intake Duration at 050 inch Lift234
Exhaust Duration at 050 inch Lift238
Duration at 050 inch Lift234 int./238 exh.
Advertised Intake Duration296
Advertised Exhaust Duration300
Advertised Duration296 int./300 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.539 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.548 in.
Valve Lift with Factory Rocker Arm Ratio0.539 int./0.548 exh. lift
Lobe Separation (degrees)112
Intake Valve Lash0.000 in.
Exhaust Valve Lash0.000 in.
Computer-Controlled CompatibleNo
QuantitySold individually.
 

Produce maximum torque in your street/strip engine.

These Performer RPM hydraulic roller camshafts from Edelbrock are dyno-matched to Performer RPM Power Packages. Designed for street high-performance and racing applications, these roller tappet cams reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

Warranty

Edelbrock Corporation products are covered by a general warranty that states that their products will be free from defects in materials and workmanship. The length of this warranty is as follows: Performer series carburetors and Race Division products (90 days), remanufactured carburetors (30 days), Tubular Exhaust Systems and Thunder Series AVS Carburetors (one year), stainless steel exhaust systems (five years), RPM series mufflers/cat-back exhaust systems and IAS strut and shock absorbers (limited lifetime warranty; finish and shock boots are not covered), and crate engines (2 years or 24,000 miles, whichever comes first). All warranties are based on the assumption that the product(s) were properly installed, subjected to normal use and service, and that they have not been modified, neglected, or used on racing or competition applications. The warranty covers only the product itself, and not the cost of installation and removal. Edelbrock's warranty card must be completed and received by Edelbrock no later than 30 days from the purchase date to validate the warranty. Cylinder heads must be returned to Edelbrock for inspection before any refund or exchange will be done.