Warnings

close

Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

close

Crane Cams 253901 - Crane Hydraulic Flat Tappet Camshafts

Crane Cams 253901 - Crane Hydraulic Flat Tappet Camshafts large image

Image is a representation of this part. Actual part may vary.

  • Camshaft, Hydraulic Flat Tappet, Advertised Duration 260/272, Lift .427/.454, Chevy, V6, Each
  • Application Specific
  • Additional Info
    • Substitute Part: CCA-16-232-4
      The part number you requested is out of stock; however, the substitute item is very similar to the item you want.
  • Estimated Ship Date: 6/4/2012
 
BrandCrane Cams
Manufacturer's Part Number253901
Part TypeCamshafts
Product LineCrane Hydraulic Flat Tappet Camshafts
Summit Racing Part NumberCRN-253901
UPC02117401161
 
Cam StyleHydraulic flat tappet
Basic Operating RPM Range1,500-4,500
Intake Duration at 050 inch Lift204
Exhaust Duration at 050 inch Lift216
Duration at 050 inch Lift204 int./216 exh.
Advertised Intake Duration260
Advertised Exhaust Duration272
Advertised Duration260 int./272 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.427 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.454 in.
Valve Lift with Factory Rocker Arm Ratio0.427 int./0.454 exh.
Lobe Separation (degrees)112
Computer-Controlled CompatibleNo
Grind NumberH-260-2
Valve Springs RequiredYes
QuantitySold individually.
 

How are the Crane hydraulic flat tappet camshafts described? Some would use words like "power", "versatility", "dependability", and "revered." All of those are perfectly acceptable ways to characterize the most popular type of OEM camshaft through the late '80s. The reasons for the strong allegiance are simple and true. The Crane hydraulic flat tappet camshaft's lifter profiles can provide a power curve that tops out just over 7000 rpm (when used in conjunction with high performance hydraulic lifters) while offering a history of low maintenance requirements. Crane also provides you with a multitude of flat tappet camshaft choices ranging from grinds to improve bottom-end torque for towing -- to aggressive profiles with rough idle characteristics that will awaken your innermost horsepower demons. Crane Cams has the industry's largest database of camshaft profiles. This enables Crane to provide you with the camshaft that's ideally suited for your application.

Warranty

close

Loading...

Application

Results 1-3 of 3

 
MakeCHEVROLET
Engine TypeV6
Engine Size2.8L/173
Liter2.8
CID173
Beginning Year1980
Ending Year1993
Engine FamilyGM V6
Camshaft UsageStreet
Application NotesFor emissions controlled vehicles without computer.
 
 
MakeCHEVROLET
Engine TypeV6
Engine Size3.1L/189
Liter3.1
CID189
Beginning Year1990
Ending Year1994
Engine FamilyGM V6
Camshaft UsageStreet
Application NotesFor emissions controlled vehicles without computer.
 
 
MakeCHEVROLET
Engine TypeV6
Engine Size3.4L/207
Liter3.4
CID207
Beginning Year1991
Ending Year1994
Engine FamilyGM V6
Camshaft UsageStreet
Application NotesFor emissions controlled vehicles without computer.
 
    • - 1 -

Required Parts

Required Parts: Additional parts that are required in order to install or use part number CRN-253901.

Results 1-11 of 11

COMP Cams 159 - COMP Cams Engine Break-In Oil Additive

View Image and Compare
  • COMP Cams 159 - COMP Cams Engine Break-In Oil Additive

Motor Oil Additive, Engine Break-In, 12 oz., Each

Part Number: CCA-159

Estimated Ship Date: 5/29/2012

WarningsRestricted, Ground
Warnings

close

Crane Cams 99003-1 - Crane Super Lube Break-In Concentrate

View Image and Compare
  • Crane Cams 99003-1 - Crane Super Lube Break-In Concentrate

Motor Oil Additive, Engine Oil Break-In-Additive, 8 oz., Each

Part Number: CRN-99003-1

Estimated Ship Date: 5/29/2012

WarningsRestricted, Ground

Crane Cams 99041-1 - Crane Stamped Steel Valve Locks

View Image and Compare
  • Crane Cams 99041-1 - Crane Stamped Steel Valve Locks

Valve Locks, Stamped, Steel, 7 Degree, 1-Groove, 11/32 in. Valve Stem, Set of 16

Part Number: CRN-99041-1

Estimated Ship Date: 5/29/2012

Crane Cams 99097-1 - Crane Machined Steel Valve Locks

View Image and Compare
  • Crane Cams 99097-1 - Crane Machined Steel Valve Locks

Valve Locks, Machined, Hardened Steel, 7 Degree,1-Groove,11/32 in. Valve Stem, Set of 16

Part Number: CRN-99097-1

Estimated Ship Date: 5/29/2012

Crane Cams 99286-12 - Crane Anti-Pump Up Hydraulic Lifters

View Image and Compare
  • Crane Cams 99286-12 - Crane Anti-Pump Up Hydraulic Lifters

Lifters, Hydraulic Flat Tappet, Chevy, Set of 12

Part Number: CRN-99286-12

Estimated Ship Date: 6/4/2012

Crane Cams 99848-12 - Crane Single Valve Springs

View Image and Compare
  • Crane Cams 99848-12 - Crane Single Valve Springs

Valve Springs, Single, 1.255 in. Outside Diameter, 432 lbs./in. Rate, 1.153 in. Coil Bind Height, Set of 12

Part Number: CRN-99848-12

Estimated Ship Date: 5/29/2012

Crane Cams 99915-12 - Crane Steel Valve Spring Retainers

View Image and Compare
  • Crane Cams 99915-12 - Crane Steel Valve Spring Retainers

Valve Spring Retainers, Steel, 7 Degree, 1.250 in. Outside Diameter, .607 in. Inside Diameter, Set of 12

Part Number: CRN-99915-12

Estimated Ship Date: 5/29/2012

Lucas Oil 10063-1 - Lucas Engine Break-In Oil Additive

View Image and Compare
  • Lucas Oil 10063-1 - Lucas Engine Break-In Oil Additive

Motor Oil Additive, Engine Break-In, 16 oz., Each

Part Number: LUC-10063-1

Estimated Ship Date: 5/29/2012

WarningsRestricted, Ground

Lunati 301 - Lunati Engine Break-In Lubricant

View Image and Compare
  • Lunati 301 - Lunati Engine Break-In Lubricant

Motor Oil Additive, Engine Break-In, 12 oz., Each

Part Number: LUN-301

Estimated Ship Date: 5/29/2012

WarningsRestricted, Ground

Red Line Synthetic Oil 81403 - Red Line Engine Oil Break-In Additive

View Image and Compare
  • Red Line Synthetic Oil 81403 - Red Line Engine Oil Break-In Additive

Motor Oil Additive, Engine Break-In, 16 oz., Each

Part Number: RED-81403

Estimated Ship Date: 5/29/2012

WarningsRestricted, Ground

Trick Flow Specialties TFS-94000 - Trick Flow® Engine Oil Supplements

View Image and Compare
  • Trick Flow Specialties TFS-94000 - Trick Flow® Engine Oil Supplements

Motor Oil Additive, Engine Break-In, 12 oz., Each

Part Number: TFS-94000

Estimated Ship Date: 5/29/2012

Savings InfoOn SaleWarningsRestricted, Ground
Special Savings

close

Suggested Parts

Suggested Parts: Parts that may improve the performance or installation of part number CRN-253901.

Results 1-7 of 7

COMP Cams 190DVD - COMP Cams Cam Installation and Degreeing Videos/DVDs

View Image and Compare
  • COMP Cams 190DVD - COMP Cams Cam Installation and Degreeing Videos/DVDs

Video, DVD, "Proper Procedure to Install And Degree A Camshaft", Each

Part Number: CCA-190DVD

Estimated Ship Date: 5/29/2012

Crane Cams 25621-12 - Crane Chromoly Pushrods

View Image and Compare
  • Crane Cams 25621-12 - Crane Chromoly Pushrods

Pushrods, Chromoly, Heat-Treated, 5/16 in. Diameter, 6.163 in. Length, Chevy, V6, Set of 12

Part Number: CRN-25621-12

Estimated Ship Date: 6/4/2012

Crane Cams 25750-12 - Crane Gold Race Extruded Rocker Arms

View Image and Compare
  • Crane Cams 25750-12 - Crane Gold Race Extruded Rocker Arms

Rocker Arms, 3/8 in. Stud Mount, Full Roller, Aluminum, 1.5 Ratio, Chevy, 2.8/3.1/3.4L, Set of 12

Part Number: CRN-25750-12

Estimated Ship Date: 6/4/2012

Crane Cams 25759-1 - Crane Gold Race Extruded Rocker Arms

View Image and Compare
  • Crane Cams 25759-1 - Crane Gold Race Extruded Rocker Arms

Rocker Arm, Stud Mount, Full Roller, Aluminum, 1.60 Ratio, Fits 3/8 in. Stud, GM V6, Each

Part Number: CRN-25759-1

Estimated Ship Date: 6/4/2012

Crane Cams 99002-1 - Crane Super Moly Assembly Lube

View Image and Compare
  • Crane Cams 99002-1 - Crane Super Moly Assembly Lube

Assembly Lubricant, Super Moly, for Camshaft Break-In, 1 oz., Paste, Each

Part Number: CRN-99002-1

Estimated Ship Date: 5/29/2012

WarningsRestricted, Ground

Summit Racing SUM-CSUM2600 - Summit Racing® Valvetrain Organizer Tray Combos

View Image and Compare
  • Summit Racing SUM-CSUM2600 - Summit Racing® Valvetrain Organizer Tray Combos

Organizer Tray, Valvetrain, Kit

Part Number: SUM-CSUM2600

Estimated Ship Date: 5/29/2012

Trick Flow Specialties TFS-90150 - Trick Flow® Track Max® Cam Handles

View Image and Compare
  • Trick Flow Specialties TFS-90150 - Trick Flow® Track Max® Cam Handles

Camshaft Installation Handle, 8 in. Length, Zinc Finish, Universal, Each

Part Number: TFS-90150

Estimated Ship Date: 5/29/2012

close