P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are built on steel backings with extra-thin overlays to prevent overlay fatigue. In addition, the oil grooves on most applications extend all the way around both halves for better oiling.
Warranty
Results 1-9 of 9
| |
| Make | | CHEVROLET |
| Liter | | 4.3 |
| CID | | 262 |
| Engine Type | | V8 |
| Engine Size | | 4.3L/262 |
| Beginning Year | | 1975 |
| Ending Year | | 1976 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 4.3 |
| CID | | 265 |
| Engine Type | | V8 |
| Engine Size | | 4.3L/265 |
| Beginning Year | | 1955 |
| Ending Year | | 1957 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 4.4 |
| CID | | 267 |
| Engine Type | | V8 |
| Engine Size | | 4.4L/267 |
| Beginning Year | | 1979 |
| Ending Year | | 1982 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 5.0 |
| CID | | 302 |
| Engine Type | | V8 |
| Engine Size | | 5.0L/302 |
| Beginning Year | | 1968 |
| Ending Year | | 1968 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 5.0 |
| CID | | 305 |
| Engine Type | | V8 |
| Engine Size | | 5.0L/305 |
| Beginning Year | | 1976 |
| Ending Year | | 2002 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 5.0 |
| CID | | 307 |
| Engine Type | | V8 |
| Engine Size | | 5.0L/307 |
| Beginning Year | | 1968 |
| Ending Year | | 1973 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 5.4 |
| CID | | 327 |
| Engine Type | | V8 |
| Engine Size | | 5.4L/327 |
| Beginning Year | | 1968 |
| Ending Year | | 1969 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 5.7 |
| CID | | 350 |
| Engine Type | | V8 |
| Engine Size | | 5.7L/350 |
| Beginning Year | | 1967 |
| Ending Year | | 2002 |
| Engine Family | | Chevy small block Gen I |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
| |
| Make | | CHEVROLET |
| Liter | | 5.7 |
| CID | | 350 |
| Engine Type | | V8 |
| Engine Size | | 5.7L/350 |
| Beginning Year | | 1992 |
| Ending Year | | 1997 |
| Engine Family | | Chevy small block Gen II (LT-based engines) |
| Crankshaft Undersize (in) | | Stock |
| Crankshaft Undersize (mm) | | Stock |
| |
Suggested Parts: Parts that may improve the performance or installation of part number CLE-MS909P.
Results 1-3 of 3
Assembly Lubricant, for Engine Break-In, 4 oz., Each
Part Number:
SLP-55-400
Estimated Ship Date: 5/29/2012
Assembly Lubricant, for Engine Break-In, 1.5 oz., Each
Part Number:
SLP-55403B
Estimated Ship Date: 5/29/2012
Plastigage, Green Kit, 0.001 in.-0.003 in./.025mm-.076mm, Range, Each
Part Number:
SLP-SPG1
Estimated Ship Date: 5/29/2012