Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

COMP Cams K32-234-4 - COMP Cams Magnum Hydraulic Cam and Lifter Kits

  • Cam/Lifter, Valvetrain, Hydraulic Flat Tappet, Adv. Duration 292/292, Lift .560/.560, Ford, 351C, 351M, 400
  • Application Specific
  • Estimated Ship Date: 2/13/2012
 
BrandCOMP Cams
Manufacturer's Part NumberK32-234-4
Part TypeCamshaft and Lifter Kits
Product LineCOMP Cams Magnum Hydraulic Cam and Lifter Kits
Summit Racing Part NumberCCA-K32-234-4
UPC036584460923
 
Cam StyleHydraulic flat tappet
Basic Operating RPM Range2,500-6,500
Intake Duration at 050 inch Lift244
Exhaust Duration at 050 inch Lift244
Duration at 050 inch Lift244 int./244 exh.
Advertised Intake Duration292
Advertised Exhaust Duration292
Advertised Duration292 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.560 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.560 in.
Valve Lift with Factory Rocker Arm Ratio0.560 int./0.560 exh.
Lobe Separation (degrees)110
Grind NumberFC 292H-10
Computer-Controlled CompatibleNo
Lifters IncludedYes
Lifter StyleHydraulic flat tappet
Valve Springs IncludedYes
Outside Diameter of Outer Spring (in)1.509 in.
Retainers IncludedYes
Locks IncludedYes
Valve Stem Seals IncludedYes
Timing Chain and Gears IncludedYes
Timing Chain StyleDouble non-roller
Assembly Lubricant IncludedYes
Pushrods IncludedNo
Rocker Arms IncludedNo
Gaskets IncludedNo
Valve Springs RequiredNo
QuantitySold as a kit.
 

Designed for hot street/strip cars, these COMP Cams Magnum series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these cam and lifter kits provide maximum top-end performance for your high performance car.

Warranty

Loading...