Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

COMP Cams CL20-232-4 - COMP Cams Magnum Hydraulic Cam and Lifter Kits

COMP Cams CL20-232-4 - COMP Cams Magnum Hydraulic Cam and Lifter Kits large image

Image is a representation of this part. Actual part may vary.

  • Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 280/280, Lift .480/.480, Mopar, Small Block, Kit
  • Application Specific
  • Estimated Ship Date: Today
 
BrandCOMP Cams
Manufacturer's Part NumberCL20-232-4
Part TypeCamshaft and Lifter Kits
Product LineCOMP Cams Magnum Hydraulic Cam and Lifter Kits
Summit Racing Part NumberCCA-CL20-232-4
UPC036584450443
 
Cam StyleHydraulic flat tappet
Basic Operating RPM Range2,500-6,000
Intake Duration at 050 inch Lift230
Exhaust Duration at 050 inch Lift230
Duration at 050 inch Lift230 int./230 exh.
Advertised Intake Duration280
Advertised Exhaust Duration280
Advertised Duration280 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.480 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.480 in.
Valve Lift with Factory Rocker Arm Ratio0.480 int./0.480 exh.
Lobe Separation (degrees)110
Grind Number280H
Computer-Controlled CompatibleNo
Lifters IncludedYes
Lifter StyleHydraulic flat tappet
Valve Springs IncludedNo
Retainers IncludedNo
Locks IncludedNo
Valve Stem Seals IncludedNo
Timing Chain and Gears IncludedNo
Assembly Lubricant IncludedYes
Pushrods IncludedNo
Rocker Arms IncludedNo
Gaskets IncludedNo
Valve Springs RequiredYes
QuantitySold as a kit.
 

Designed for hot street/strip cars, these COMP Cams Magnum series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these cam and lifter kits provide maximum top-end performance for your high performance car.

Warranty

Loading...