Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

COMP Cams CL12-242-2 - COMP Cams Xtreme Energy Cam and Lifter Kits

COMP Cams CL12-242-2 - COMP Cams Xtreme Energy Cam and Lifter Kits large image

Image is a representation of this part. Actual part may vary.

  • Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 268/280, Lift .477/.480, Chevy, Small Block, Kit
  • Application Specific
  • Estimated Ship Date: Today
 
BrandCOMP Cams
Manufacturer's Part NumberCL12-242-2
Part TypeCamshaft and Lifter Kits
Product LineCOMP Cams Xtreme Energy Cam and Lifter Kits
Summit Racing Part NumberCCA-CL12-242-2
 
Cam StyleHydraulic flat tappet
Basic Operating RPM Range1,600-5,800
Intake Duration at 050 inch Lift224
Exhaust Duration at 050 inch Lift230
Duration at 050 inch Lift224 int./230 exh.
Advertised Intake Duration268
Advertised Exhaust Duration280
Advertised Duration268 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.477 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.480 in.
Valve Lift with Factory Rocker Arm Ratio0.477 int./0.480 exh. lift
Lobe Separation (degrees)110
Intake Valve Lash0.000 in.
Exhaust Valve Lash0.000 in.
Grind NumberCS XE268H-10
Computer-Controlled CompatibleNo
Lifters IncludedYes
Lifter StyleHydraulic flat tappet
Valve Springs IncludedNo
Retainers IncludedNo
Locks IncludedNo
Valve Stem Seals IncludedNo
Timing Chain and Gears IncludedNo
Assembly Lubricant IncludedYes
Pushrods IncludedNo
Rocker Arms IncludedNo
Gaskets IncludedNo
QuantitySold as a kit.
 

Improve your throttle response and top-end horsepower with Xtreme performance!

COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam and lifter kit available for you. By using an aggressive lobe profile, these cam kits provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum.

Warranty

COMP Cams warrants its products to be free from defects in material and workmanship for one year from the date of purchase. This warranty is valid on camshafts only where new lifters and proper valve springs are used. This warranty is voided on any part used in racing applications or any cam part ending in -5, -6, -7, -8, or -9. Ultra Gold aluminum rocker arms carry a limited lifetime warranty.