Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

COMP Cams 986-16 - COMP Cams Valve Springs

COMP Cams 986-16 - COMP Cams Valve Springs large image

Image is a representation of this part. Actual part may vary.

  • Valve Springs, Dual, 1.430 in. Outside Diameter, 322 lbs./in. Rate, 1.150 in. Coil Bind Height, Set of 16
  • Application Specific
  • Estimated Ship Date: Today
 
BrandCOMP Cams
Manufacturer's Part Number986-16
Part TypeValve Springs
Product LineCOMP Cams Valve Springs
Summit Racing Part NumberCCA-986-16
 
Number of Springs Per ValveDual
Outside Diameter of Outer Spring (in)1.430 in.
Coil Bind Height (in)1.150 in.
Damper Spring IncludedNo
Spring Rate (lbs/in)322 lbs./in.
Inside Diameter of Outer Spring (in)1.070 in.
Inside Diameter of Inner Spring (in)0.697 in.
Valve Spring StyleStandard
CoatedNo
QuantitySold as a set of 16.
 

Valve springs that won't crack under pressure.

Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet their cam requirements.

Warranty

COMP Cams warrants its products to be free from defects in material and workmanship for one year from the date of purchase. This warranty is valid on camshafts only where new lifters and proper valve springs are used. This warranty is voided on any part used in racing applications or any cam part ending in -5, -6, -7, -8, or -9.