Warnings
Sorry, you can only compare 10 items.

Would you like to replace your oldest item in the compare list?

Yes, add this item | No, view my current items

COMP Cams 12-212-2 - COMP Cams Magnum Hydraulic Camshafts

  • Camshaft, Hydraulic Flat Tappet, Advertised Duration 280/280, Lift .480/.480, Chevy, Small Block, Each
  • Application Specific
  • Estimated Ship Date: Today
 
BrandCOMP Cams
Manufacturer's Part Number12-212-2
Part TypeCamshafts
Product LineCOMP Cams Magnum Hydraulic Camshafts
Summit Racing Part NumberCCA-12-212-2
 
Cam StyleHydraulic flat tappet
Basic Operating RPM Range2,000-6,000
Intake Duration at 050 inch Lift230
Exhaust Duration at 050 inch Lift230
Duration at 050 inch Lift230 int./230 exh.
Advertised Intake Duration280
Advertised Exhaust Duration280
Advertised Duration280 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio0.480 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio0.480 in.
Valve Lift with Factory Rocker Arm Ratio0.480 int./0.480 exh. lift
Lobe Separation (degrees)110
Intake Valve Lash0.000 in.
Exhaust Valve Lash0.000 in.
Computer-Controlled CompatibleNo
Grind NumberCS 280H-10
QuantitySold individually.
 

Give your high performance engine the camshaft it deserves.

Designed for hot street/strip cars, these COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these camshafts provide maximum top-end performance for your high performance car.

Warranty

COMP Cams warrants its products to be free from defects in material and workmanship for one year from the date of purchase. This warranty is valid on camshafts only where new lifters and proper valve springs are used. This warranty is voided on any part used in racing applications or any cam part ending in -5, -6, -7, -8, or -9. Ultra Gold aluminum rocker arms carry a limited lifetime warranty.